| Stems
by Type |
Cartridge style |
Ed Lang's User friendly guide to
Faucet Stem and Handle Selection
This page is dedicated for us to list all of the stems we stock, by length.
before clicking below, measure your stem from the top where the handle fits on the knurled end to the bottom where the washer is attached
| 1-2" stems |  |
|
2-3" stems |
|
| 3-4"stems |  |
| 5-6" stems |  |
|
Pictured to the left are the
Belvedere
Stems with Bonnets, they are available in right hand 42349 (hot) and left hand 56867 (cold). Measures
1-15/16"
from the left
where the washer is attached, to the right where the handle fits on the knurled end.
These stems are most
commonly used on two handle beauty salon fixtures Same as Danco part # 15766 and 15767 |
 |
|
|
Pictured to the left is the Speakman Stem with Bonnet, it is available in right hand only and is most commonly used on two or three handle bath valves . Measures 3-13/16" from the left where the washer is attached, to the right where the handle fits on the knurled end. Same as Danco part # 15565 |
 |
Pictured to the left is the Speakman Stem with Bonnet, it is available in right hand only and is most commonly used on old Kent faucets . Measures 3-3/4" from the left where the washer is attached, to the right where the handle fits on the knurled end. Same as Danco part # 17088 |
 |
Pictured to the left are the Harcraft Stems with Bonnet, they are available in right hand 22154 (hot) and left hand 22161 (cold). Measures 3-7/8" from the left where the washer is attached, to the right where the handle fits on the knurled end. Same as Danco part # 15609 and 15610 |
 |
|
|
Kohler |
|
 |
Pictured to the left are the Kohler Stems with Bonnet, they are available in right hand 22231 (hot) and left hand 22238 (cold). Measures 3-7/8" from the left where the washer is attached, to the right where the handle fits on the knurled end. Same as Danco part # 15163 and 15164 |
 |
|
|
Union Gopher |
|
 |
Pictured to the left are the Union Gopher stems with Bonnet, they are available in right hand 26450 (hot) and left hand 26443 (cold). Measures 3-7/8" from the left where the washer is attached, to the right where the handle fits on the knurled end. Same as Danco part # 15331 and 15332 |
 |
|
|
Central Brass |
|
 |
Pictured to the left is the Central Brass Stem with Bonnet, it is available in right hand only and is most commonly used on two or three handle bath valves. Measures 3-7/8" from the left where the washer is attached, to the right where the handle fits on the knurled end. Same as Danco part # 15672. |
|
Michigan Brass |
|
 |
Pictured to the left are the Michigan Brass stems with Bonnet, they are available in right hand 22644 (hot) and left hand 22637 (cold). Measures 3-7/8" from the left where the washer is attached, to the right where the handle fits on the knurled end. Same as Danco part # 15545 and 15546 |
 |
|
|
Briggs |
|
 |
Pictured to the left is the Briggs Stem with Bonnet, it is available in right hand only and is most commonly used on two or three handle bath valves. Measures 4" from the left where the washer is attached, to the right where the handle fits on the knurled end. Same as Danco part # 15747. |
|
Royal Brass |
|
 |
Pictured to the left is the Royal Brass Stem with Bonnet, it is available in right hand only and is most commonly used on two or three handle bath valves. Measures 3-7/8" from the left where the washer is attached, to the right where the handle fits on the knurled end. Same as Danco part # 17064. |
|
American Brass |
|
 |
Pictured to the left are the American Brass stems with Bonnet, they are available in right hand 26464 (hot) and left hand 22457 (cold). Measures 3-15/16" from the left where the washer is attached, to the right where the handle fits on the knurled end. Same as Danco part # 17065 and 17066 |
 |
|
 |
2886 | Sayco with bonnet $23.98 |
| Pictured above is the sayco Stem with Bonnet, it is available in right hand only and is most commonly used on two or three handle bath valves manufactured prior to 1979. the diverter stem is pictured below to replace the handle or escutcheons it is more cost effective to use part # 123456 | Stem only | |
|
More Info | hot and cold stems with bonnet |
| Pictured above is the American Standard Stem with Bonnet, it is available in right hand only and is most commonly used on two or three handle bath valves manufactured prior to 1979. the diverter stem is pictured below to. replace the handle or escutcheons click the respective hyperlink. | ||
 |
more Info | American standard diverter can also be rebuilt with # 92033 kit along with a # 32088 diverter washer |
 |
57876 | with bonnet |
|
|
|
Ed Young's Plumbing parts is proud of their reputation for stocking the odd ball plumbing part. We recently acquired all of the inventory from Buffalo Faucet Works, an old distributor for current and discontinued faucet Stems, Handles, escutcheons, packing nuts and while combining their inventory with our expansive list of old faucet parts washers gaskets and accessories, we have in stock any stem, handle or escutcheon listed on these pages. Service is our specialty so stop in to our store located in Williamsville NY, a suburb of Buffalo and Western New York to check with our plumbing specialist Gary Lee, Ed Lang and Wayne Neuman
| Stems
by Type |
Cartridge style |