| Stems
by Type |
Cartridge style |
American Standard 176A
|
|
|
|
| American Standard Stem with bonnet pictured above fits the Colony model faucets and is part # 454538 @ $29.99 each and replaces both hot and cold. if you would like to purchase the stem or bonnet only, we will sell it to you, however there are no returns and we do not guarantee that the two parts will fit properly. | American Standard Diverter stem pictured above is part # 175973 and sells for $19.99. If you want to rebuild your existing Diverter you will need part # 92033 rebuild kit @ $3.30 along with # 32088 Diverter washer @ $2.10. If you wish to rebuild your stem assy you will only need the 92033 rebuild kit at $3.30 plus the Seats mentioned below | |
|
|
|
|
| The above handle is the most common handle that fits the above stem and diverter. Our part # 72302 and sells for $10.99 each. | The same part # 72302 pictured at a different angle. | |
|
|
|
|
| The above escutcheon Tube has internal fine threads on one end is part # 85868 and sells for 5.55 each | The above escutcheon is part # 85875 and sells for $4.20 each | |
|
|
|
|
| The above faucet seat, part # 453-787 @ $2.50 each, is probably the most important part that needs to be changes when you have a drippy faucet situation. The hot side is most likely to be changed, however we recommend you change them both | The above seat wrench is required to remove the seat with out damage Part # 176-768 @ $7.49 each | |
|
|
|
|
| The escutcheons can be removed with the above strap wrench with out damaging the chrome. Our part # 321344 @ $14.99. | The Stems can be removed with a colony bonnet wrench pictured above or a 1/2" open end wrench, being careful not to distort the bonnet, However our experience tells us that your best results will be using the tool pictured above Part # 31735 @ 12.99 |
|
|
|
Ed Young's Plumbing parts is proud of their reputation for stocking the odd ball plumbing part. We recently acquired all of the inventory from Buffalo Faucet Works, an old distributor for current and discontinued faucet Stems, Handles, escutcheons, packing nuts and while combining their inventory with our expansive list of old faucet parts washers gaskets and bla bla bla Popups drains and valves are our specialty so stop in to our store located in Williamsville NY, a suburb of Buffalo and Western New York to check with our plumbing specialist Gary Lee, Ed Lang and Chuck Dio
| Stems
by Type |
Cartridge style |
